Archive | drywall RSS feed for this section

How to tape drywall joints

3 Feb

Next on the project list is to learn how to mud and tape the drywall joints. If this looks intimidating or you are a perfect noob when it comes to diy projects, I recommend you to take your time and to read these tips. Even if you will never undertake a similar project on your own, this will be a useful reading. Invest in high quality materials and visualize everything before starting the project, so you can save time and money. I “stole” a few ideas from this awesome tutorial so make sure you don’t miss it, for more images and for more tips coming from true professionals.

 

How to tape drywall joints

Fitting-the-mesh-to-the-exteiror-corners

 

First of all you need to attach the fiberglass mesh to the seams, making sure you center it into place. Use your fingers to press it to the seams. It may look as a silly advice, but make sure you apply the mesh to the seams using the glue side oriented to the wall. Use a cutter to adjust the size of the mesh.

Next, mix a small quantity of drywall compound. You might have to add some water to thin it a little, so you can work with it easier. Use a 6″ drywall knife to apply an even and constant layer of mud to the seams. Leave it for 12 h to dry out and then apply a new layer, this time using a 10″ knife. Focus on the transition between the coat of mud and the wall, trying to make them as smooth as possible. Leave the second coat to dry out for at least 12 hours.

Use sandpaper to smooth the surface before applying the final coat of mud. Use a 12″ putty knife to apply the third coat evenly. After it dries out, you need to use a sponge to remove the dust and to even out the surface. Check out more here: http://diypergolaplans.tumblr.com/

 

Advertisements

Fixing holes in drywall

5 Oct

Repairing drywall is one of the issues we face often, as homeowner. Unfortunately, we got used to hire a handyman to get the job done for us, which means an expensive repair  However, what most of us aren’t aware of is that fixing drywall isn’t as difficult as it might seem at first glance, and we are going to prove it in this article. Actually even a newbie can do the repair in just several hours, if the right tools and materials are used. Just pay attention to the information in this article, if you want to learn how to fix a hole in drywall.

Fixing holes in drywall

Fixing holes in drywall

First of all you need to evaluate the depth of the hole as well as its width. If the holes is deeper than 1/2” or wider than 3”, than it’s necessary to fit a backing support and to fit a drywall patch.

In order to obtain a professional result, we strongly recommend you to cut out the damaged area and to make it square.

In order to cut around the hole like a pro, we recommend you to use a drywall saw or a keyhole saw. These tools are designed for this purpose so you will obtain a perfectly square hole, without tearing the paper layers. Moreover, we recommend you to sand around the hole, using a sandblock and 100 grit sandpaper. By removing the paint coats, the drywall compound will stick properly to the wall.

Next, measure the width and the height of the hole and cut a patch from a piece of drywall having the same thickness as the wall. It is essential to pay attention to this tip, otherwise the surface won’t be even. On the other hand, you have to install the backing support, which can be either made of 1×2 or 1×4 lumber. Use several drywall screws to secure the wooden strips into place.

Applying compound over the patch

Applying compound over the patch

Afterwards, place the patch into place and secure it to the backing support. Drive in several drywall screws to secure it into place tightly. In addition, cover the edges of the patch with drywall paper an apply several coats of drywall. Allow the mud to harden, before spreading the next coat.

Last but not least, you should smooth the area with 100-grit sandpaper, until there is a proper transition between the patch and the rest of the wall. Make sure there are no dents or irregularities before applying the primer and the paint coats.

Don’t forget to spread the primer, otherwise the paint will have a different color as compared to the rest of the wall.